Industry News
Tesla's Car Repair Accounts for 70% of the Cost of the Car
- Posted: 02/11/2023 19:11:34
- Edited: 02/11/2023 19:23:03
- Clicks: 76
In 2022, a Tesla owner in Wuxi accidentally hit the rear of a Model Y against a wall when reversing, causing serious damage to the right rear and the top of the rear shock absorber tower. Therefore, the...
Die-cast Mold Design for New Energy Vehicle Motor Housings (Part two)
- Posted: 12/29/2022 16:20:07
- Edited: 12/29/2022 16:25:23
- Clicks: 14
3. The application of the mold After three batch production tests on the machine, three sets of process parameters were optimized for small batch production. The die-casting process parameters are shown...
Die-cast Mold Design for New Energy Vehicle Motor Housings (Part one)
- Posted: 12/16/2022 16:50:57
- Edited: 12/16/2022 17:32:14
- Clicks: 4
Abstract: The mold cooling system combined with a 3D printing water channel and high-pressure cooling is used to realize the uniform cooling of the electric vehicle motor housing mold, and the sensor...
Rear Subframes Made by Integrated Die Casting
- Posted: 11/30/2022 20:59:12
- Edited: 11/30/2022 21:18:09
- Clicks: 12
The "2022 European Best Aluminum Die-cast Award Results" were announced, among which the "one-piece die-cast rear subframe" made by the German Hantmann company using die-cast technology...
Measures of Leakages of Aluminum Die Castings (Part Two)
- Posted: 10/23/2022 09:13:57
- Edited: 10/23/2022 09:21:59
- Clicks: 10
2.2 Optimizing the structure of the mold or product After processing a cylinder block, it is found that there are large shrinkage holes in the bolt holes near the water channel (Figure 3). At the...
News
Contact
Latest News
Technical Articles
Useful Links
Copyright © 2014-2024 China Topper Die Casting Company Limited. All Rights Reserved. Privacy Policy | Terms of Service | Sitemap
Links: Linear Robot Arm for Die Casting Machine, Die Casting, China Manufacturers.
Website Design & Support: jeawin.com