Industry News
The Cooling Mechanism of Aluminum Alloy ADC12 Die-cast Parts
- Posted: 01/27/2022 12:07:31
- Edited: 01/27/2022 12:25:47
- Clicks: 11
Abstract: After the aluminum alloy die casting part is taken from the die casting mold, the cooling effect and residual heat of the casting are studied under different cooling...
The Effect of X-ray Inspection on the Defect of Castings and Development of the Foundry Industry
- Posted: 10/26/2021 11:48:17
- Edited: 10/26/2021 11:52:29
- Clicks: 27
Aluminum castings have the advantages of accurate sizes and smooth surfaces and they can be used directly after machining, which not only improves the metal's utilization rate, but...
The Secret of Tesla's New Model S Becoming the Most Mass-produced Car
- Posted: 08/09/2021 14:55:33
- Edited: 08/09/2021 15:09:05
- Clicks: 12
A few days ago, Tesla held the first delivery ceremony of the new Model S at the Fremont plant in California. Tesla has redesigned the vehicle engineering of the new Model S. Judging from the body-in-white...
Tesla Develops High-impact Aluminum Alloys for Die-cast Electric Car Parts
- Posted: 07/14/2021 09:41:44
- Edited: 07/14/2021 10:01:38
- Clicks: 42
According to foreign media reports, a new Tesla patent shows that the company has developed a new kind of aluminum alloy, and it has high strength and good conductivity, which can...
Methods of Preventing Oxidized Slag Inclusions
- Posted: 05/20/2021 15:23:42
- Edited: 05/20/2021 15:45:12
- Clicks: 46
Methods to prevent oxidized slag inclusions are as follows: 1. Repour molten metal from the riser. Improve the design of the riser. 2. The furnace charge should be clean and non-corrosive....
News
Contact
Latest News
Technical Articles
Useful Links
Copyright © 2014-2024 China Topper Die Casting Company Limited. All Rights Reserved. Privacy Policy | Terms of Service | Sitemap
Links: Linear Robot Arm for Die Casting Machine, Die Casting, China Manufacturers.
Website Design & Support: jeawin.com