Technical Articles
Solutions to Blisters on Surfaces of Die Casts
- Posted: 08/17/2017 19:01:44
- Edited: 06/29/2018 10:33:47
- Clicks: 51
1. Reduce the air content in the die cast. The key to controlling the forming of the blister is to reduce the amount of gas getting into the die cast. 2. Avoid Shrinkage cavities. During the solidification...
Applications of Die Casting Molds in Various Industries
- Posted: 08/08/2017 16:07:11
- Edited: 06/29/2018 10:34:38
- Clicks: 28
(1) The automobile industry China is fully capable of designing and manufacturing medium and large die casting molds such as clutches, gearboxes, steering gears, gear boxes, etc in the automobile industry....
Notes for Mould Maintenance
- Posted: 05/22/2017 15:31:46
- Edited: 06/29/2018 10:35:04
- Clicks: 27
Mold maintenance should be managed by maintenance men who are qualified after going through professional training, and they must know the mold technical standards. Die casting mould is a kind of very...
Differences Between Aluminum Die Casting and Aluminum Alloy Die Casting
- Posted: 05/10/2017 16:17:35
- Edited: 06/29/2018 10:35:32
- Clicks: 24
The main raw material for aluminum die casting is aluminum The difference between aluminum die casting and aluminum alloy die casting is only one word, so people confuse aluminum die casting with aluminum...
The Application of Purification Technology of Aluminum Liquid Has An Influence on Aluminum Alloy Die Casting
- Posted: 04/28/2017 13:12:19
- Edited: 06/29/2018 10:48:13
- Clicks: 16
The application of purification technology of aluminum liquid has an influence on aluminum alloy die casting Aluminum industry is a highly marketed industry in China. In recent years, aluminum alloy die...
Aluminum Alloy Die Casting Classification
- Posted: 04/18/2017 15:21:34
- Edited: 06/29/2018 10:48:46
- Clicks: 41
Aluminum die cast castings can be manufactured as aluminum die casting auto part, aluminum die-casting automotive engine part, aluminum die-casting engine cylinder, aluminum die-casting, gasoline...
The Impact of Various Elements of Aluminum Alloy Die Casting on its Performance
- Posted: 03/27/2017 13:38:41
- Edited: 06/29/2018 10:49:30
- Clicks: 12
Impacts of different elements of aluminum alloy die casting on its performance ① Silicon: silicon can make aluminum alloy flow good, and reduce the shrinkage to improve pressure resistance. As well as...
Scalings and Solutions of Aluminum Die Castings
- Posted: 03/08/2017 16:17:43
- Edited: 06/29/2018 10:50:09
- Clicks: 19
Aluminum die casting is a process that melts aluminum into liquid, injects it into the die casting mold cavity with high pressure and high-speed. After the aluminum liquid was cooled, open the mold and...
Oxygenated Die Casting Process
- Posted: 02/24/2017 09:08:14
- Edited: 04/28/2017 17:09:19
- Clicks: 47
Oxygenated die casting, also known as pore-free die casting, mainly applied to aluminum alloy die cast process. It is a method that replaces oxygen with the gas in the cavity before die casting, and then...
News
Contact
Latest News
Technical Articles
Useful Links
Copyright © 2014-2024 China Topper Die Casting Company Limited. All Rights Reserved. Privacy Policy | Terms of Service | Sitemap
Links: Linear Robot Arm for Die Casting Machine, Die Casting, China Manufacturers.
Website Design & Support: jeawin.com